Simplifying Solar Energy Classes – The Best Routes

In a nutshell, ‘Green Energy’ utilises natural resources such as sunlight, wind, tides and geothermal heat to provide our daily energy requirement. When ‘Green’, they are all thought to be replenishable and natural. Often, by going back in time, we can see the value of wind power and windmills as modern energy sources. Regardless of this, we are mainly talking about using modern techniques to offer planet friendly and eco-efficient solutions.

In the home environment, one can see examples such as Solar Thermal and Solar Water Heating Collectors. To gain electricity from roof panels you would need solar electrical panels (PV’s). Following on from this is a process known as Biomass Energy – which includes Boilers burning wood and other fuels. We now also have Ground Source Heat Pumps – which draw out the heat left by the Sun. Finally, we have two of the most traditional forms of energy generation that have gone through some resurgence over the last few years; these being Wind Power, Wind Turbines and Hydropower (including Water Wheels.)

Thermal Energy Systems: By using different technologies, Solar Energy is effectively made up of two types of solar panels. Making hot water from solar energy is the first stage – and is known as Solar Water Heating Collection. Then we have the work of the Photovoltaic Heat Collectors, often called Solar Electrical Panels – which transform solar radiation into electricity. Across the board, Solar Panels should be mounted on a south facing roof, at an angle of 30 degrees away from horizontal – and to some extent away from blocking trees, surrounding buildings and chimneys.

Within Solar Energy overall, Solar Water Power is most commonly used in the UK. With the capacity to deliver 50 percent plus of a household’s hot water requirement annually, Solar Water heating systems are crucial to energy in the UK. The average cost of installing this type of equipment is expected to range from 500 to 1500 pounds for a DIY system, through to 2-5k for a professionally installed system.

Biomass Energy Based Systems: Historically, this has come from plants and animals, though nowadays this also includes new genetcially engineered ‘energy crops’. Considering its ability to produce energy in the form of heat and electricity, this type of energy is extremely flexible. Furthermore, within the European Markets, the UK is one of the central producers of Biomass fuels. Considering all this, and the relative lack of C02 produced, makes the whole process highly green overall. Much of the UK wood crop is sustainable, in order to ensure that C02 produced during any heating process is absorbed.

‘Energy Crops’ trees such as Willow and Poplar play a major part in the process – under the banner of Short Rotation Coppice (SRC). Of equal importance is the production of perennial grasses – because of their yield of dry matter. Whilst Agricultural and Municipal waste may be lesser known, they are essential to the whole process. One natural offshoot of agricultural work is Agricultural Waste. Municipal Waste such as food or wood can also be utilised as a biomass product.

Systems Based On Geo-Thermal Energy: Used in the generation of both warm water and electricity, this energy mainly comes from the Sun and heats the Earth. Using the ground temperature of around 12 degrees in the UK – we can both heat and cool buildings. Generally, items such as Heat Pumps are thought of as very effective, as they produce four units of energy for every one that is used for generation. A greate return of energy (sometimes almost 100 percent) is produced – because heat source pumps can operate in-line with wind turbines and solar electrical panels.

Systems Based On Wind Energy: When you consider the milling of grain and pumping of water, it is easy to see how long wind energy has been with us. Whether to your home or to a local grid, when the energy has been generated it must be delivered to a point of usage – and cannot be stored. In fact, the UK has the largest wind resource within Europe. Although we only utilise 1 percent of the current electricity capability from wind – we do have the ability to create 10 percent. Overall, electricity could be generated from as low as 2p per kWh – instead of the current 2-10 p per kWh. Because of this, it is estimated that it takes between half a year to three quarters of a year to cover the installation costs.

Finally, we have Hydropower; an area in which the UK does well within Europe. Having said that, the art of using energy from moving water (just like wind power) is very traditional. In total, this could produce something like 2 percent of all electricity required in the UK.

The Hydropower process uses a turbine that can convert the energy from one form into another. The important thing is that, without having to rely on water storage, the turbines can generate electricity. It is by using the eroded national distribution systems, that allows for outdated sluices and dams to be used by techniques known as ‘Micro-Hydro’. This smaller form of electrical output has been recently reviewed and could allocate some 200MW of capacity to the UK system. The capital cost of installing a micro-hydro system can run between 200 and 3000 pounds per kW of energy output.

Because of the energy need of the Western World, we are now seeing a rapid rise in ‘Green Energy’. Within the UK and mainly the domestic sector, we are well placed to take advantage of the schemes above.

With the rise in demand for domestic installations, both Electricians and Plumbers are well placed to take advantage of this technology. With ‘Green Energy’ rising up the political agenda in Europe, a range of financial aids and grants are becoming available. It is important to gain the correct qualifications to install these items. Electrical or plumbing training that incorporates green technology could be very useful for the future.

Author: Scott Edwards. Pop to www.electriciancoursesuk.co.uk/Solar-Energy-Courses.html or Solar Energy Training.